Posted by Bryan Felsher on March 09, 2002 at 22:23:48:
In Reply to: Re: TIGHT screws on carb cover posted by Rhubarb Sin on March 08, 2002 at 19:46:31:
Sorry you're right. It just reminded me of the
guys at work that I always have to remove broken
stripped bolts that are a pain in the ass. Socket
Head Cap Screws. If you can get three bolts loose,
you can twist the top of the carb to loosen the
4th bolt. Or if not. Grind a flat and use a
standard screwdriver. Or grind it square and use
a box wrench. Or drill it out. Try a 1/8 drill.
Or drill it for a left handed tap and that will
get it out.